CNC machining
Explore CNC machining references: dimensional tolerance definitions, metric milling speed and feed formulas, and a quotation requirements checklist.
Knowledge library
Content type
Concepts & Fundamentals
CNC Dimensional Tolerances: Limits, Function and Capability
Understand dimensional tolerances, read a worked limits example, and distinguish part requirements from CNC supplier capability claims.
Read → CNC Dimensional Tolerances: Limits, Function and CapabilityEngineering Guides
Preparing First Article Inspection Requirements for CNC Parts
Define first-article evidence, drawing revisions and production hold points before ordering CNC parts.
Read → Preparing First Article Inspection Requirements for CNC PartsEngineering Guides
Defining CNC Part Dimensions from Functional Requirements
Build a reviewable dimensional requirement from mating function, reference features, allowed variation and inspection questions.
Read → Defining CNC Part Dimensions from Functional RequirementsConcepts & Fundamentals
Internal Corner Radii in CNC Milling: Geometry and Tool Access
Understand why milled pocket corners need radii and how corner geometry, depth and access affect design review.
Read → Internal Corner Radii in CNC Milling: Geometry and Tool AccessTechnical Reference
Reading CNC Material Data: Grade, Temper and Test Conditions
Read material property tables using grade, temper, product form, test conditions and the difference between typical values and limits.
Read → Reading CNC Material Data: Grade, Temper and Test ConditionsConcepts & Fundamentals
CNC Milling vs. Turning: Motions, Features and Combined Parts
Understand milling and turning motions, typical feature groups and why a part can require both processes.
Read → CNC Milling vs. Turning: Motions, Features and Combined PartsEngineering Guides
CNC RFQ Checklist: Prepare Drawings, Requirements and Inspection
Prepare a CNC request for quotation with consistent files, material and tolerance requirements, manufacturability questions and inspection deliverables.
Read → CNC RFQ Checklist: Prepare Drawings, Requirements and InspectionConcepts & Fundamentals
3-Axis, 3+2 and Simultaneous 5-Axis Machining
Distinguish axis count, indexed positioning and simultaneous motion when discussing CNC machining access.
Read → 3-Axis, 3+2 and Simultaneous 5-Axis MachiningEngineering Guides
CNC Workholding Review: Location, Support and Clamping
Review how a CNC setup locates, supports and clamps a part without treating clamp force as a complete setup specification.
Read → CNC Workholding Review: Location, Support and ClampingConcepts & Fundamentals
Machining Burrs: Edge Location, Removal and Acceptance
Distinguish burrs from intended edge geometry and identify the locations and acceptance questions that matter in machined parts.
Read → Machining Burrs: Edge Location, Removal and AcceptanceTechnical Reference
Metric Thread Callouts: Diameter, Pitch and Tolerance Class
Read metric thread designations and separate nominal diameter, pitch, tolerance class and required threaded length.
Read → Metric Thread Callouts: Diameter, Pitch and Tolerance ClassTechnical Reference
Milling Speed and Feed: Metric Definitions and Formulas
Look up metric cutting speed, spindle speed, feed per tooth and table feed, with units, formula conditions and an arithmetic example.
Read → Milling Speed and Feed: Metric Definitions and FormulasTechnical Reference
Ra and Rz Surface Roughness: Reading Measurement Results
Interpret Ra and Rz with their units, standards and measurement conditions, without assuming a universal conversion.
Read → Ra and Rz Surface Roughness: Reading Measurement Results
No matching entries.